Liquid Concrete Floor Sealer Hardener
Overview
Liquid Concrete Floor Sealer Hardener is a curing agent designed for flooring, traffic or road-marking service.
Recommended Uses
- Used as a compatible curing agent for the corresponding coating system. Select and dose according to the coating product data and site application requirements.
Best For
- application-specific coating needs
- maintenance projects
- custom product verification
Buyer Benefits
- purpose-built coating option
- technical team review available
- suitable for project-specific selection
Key Features
- purpose-built coating option
- technical team review available
- suitable for project-specific selection
Typical Coating System
Typical specialty system: confirm substrate, exposure environment, and required documents with the Qilu technical team before quotation.
Technical Data
| Product Family | Waterborne |
| Coating Layer | Primer |
| Component System | 2K system, confirm mixing ratio from current TDS |
| Recommended Use Snapshot | Used as a compatible curing agent for the corresponding coating system. Select and dose according to the coating product data and site... |
| Typical System | Typical specialty system: confirm substrate, exposure environment, and required documents with the Qilu technical team before quotation. |
| Theoretical Consumption | 0.2-0.5kg/m2 |
Confirm current TDS/SDS, packaging, shelf life, export classification, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSPerformance Data
| Hardness | >=30% |
Application Guide
| Surface Preparation | The surface shall be dry, clean, firm and free from oil, dust, loose material and standing water. Concrete or road surfaces shall be properly cured and mechanically prepared where required. |
| Application Environment | Apply with application temperature 5-40 deg C; substrate temperature at least 3 deg C above the dew point. |
| Application Method | Apply by brush, roller, spray. Use compatible thinner/cleaner such as clean water where permitted where specified. Mix, thin and recoat according to site conditions and the coating system requirements. |
Export & Storage Notes
| Packaging | 25kg |
| Safety | Confirm substrate condition, compatibility, mixing ratio and application environment before large-area work. Protect from freezing, rain, contamination and direct exposure before the film is fully dry. Store sealed in a cool, dry and ventilated place and dispose of waste according to local regulations. |
Compatible Products
Product FAQ
Can I request the current TDS and SDS for Liquid Concrete Floor Sealer Hardener?
Yes. Contact the Qilu Paints export team with the product name, destination country, substrate, coating system, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Liquid Concrete Floor Sealer Hardener be selected for an export project?
Confirm substrate preparation, exposure environment, target durability, compatible primer/intermediate/topcoat, destination-market documentation, and dangerous-goods classification before quotation or shipment.
What should be checked before applying Liquid Concrete Floor Sealer Hardener?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, relative humidity, ventilation, mixing requirements, and recoat interval before application.
What should be checked before applying Liquid Concrete Floor Sealer Hardener?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Liquid Concrete Floor Sealer Hardener be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Liquid Concrete Floor Sealer Hardener be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Manufacturer & Product Data Source
This page is maintained by Shandong Qilu Paints Co., Ltd. for international buyers and is based on Qilu Paints legacy technical product records. Confirm current TDS/SDS, export classification, packaging, shelf life, color, and destination-market requirements with the sales and technical team before quotation, specification, or shipment.
Disclaimer
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.