Water-Based Fluorocarbon Matte Topcoat
Overview
Water-Based Fluorocarbon Matte Topcoat is a exterior wall coating topcoat designed for weather-exposed protective and decorative service.
Recommended Uses
- Suitable as a protective and decorative topcoat on interior and exterior mineral substrates, concrete, mortar and prepared wall surfaces in weather-exposed protective and decorative service.
Best For
- application-specific coating needs
- maintenance projects
- custom product verification
Buyer Benefits
- purpose-built coating option
- technical team review available
- suitable for project-specific selection
Key Features
- purpose-built coating option
- technical team review available
- suitable for project-specific selection
Typical Coating System
Typical specialty system: confirm substrate, exposure environment, and required documents with the Qilu technical team before quotation.
Technical Data
| Product Family | Waterborne |
| Coating Layer | Top |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | Suitable as a protective and decorative topcoat on interior and exterior mineral substrates, concrete, mortar and prepared wall surfaces in... |
| Typical System | Typical specialty system: confirm substrate, exposure environment, and required documents with the Qilu technical team before quotation. |
| Container Status | no hard lumps; uniform condition after stirring |
| Appearance | normal |
| Gloss (60°) | <=30GU (60°) |
Confirm current TDS/SDS, packaging, shelf life, export classification, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSPerformance Data
| Water Resistance | no abnormality (168h) |
| Alkali Resistance | no abnormality (168h) |
| Weathering Resistance | ), <=1, <=2 (3000h) |
Application Guide
| Surface Preparation | The substrate shall be sound, dry, clean and fully cured. Remove dust, laitance, grease, loose layers, mildew and other contaminants; repair cracks or uneven areas before coating. |
| Application Environment | Apply with application under suitable site temperature. |
| Application Method | Apply by airless spray, spray, brush, roller. Use compatible thinner/cleaner such as clean water where permitted where specified. Mix, thin and recoat according to site conditions and the coating system requirements. |
Export & Storage Notes
| Safety | Confirm substrate condition, compatibility, mixing ratio and application environment before large-area work. Protect from freezing, rain, contamination and direct exposure before the film is fully dry. Store sealed in a cool, dry and ventilated place and dispose of waste according to local regulations. |
Compatible Products
Product FAQ
Can I request the current TDS and SDS for Water-Based Fluorocarbon Matte Topcoat?
Yes. Contact the Qilu Paints export team with the product name, destination country, substrate, coating system, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Water-Based Fluorocarbon Matte Topcoat be selected for an export project?
Confirm substrate preparation, exposure environment, target durability, compatible primer/intermediate/topcoat, destination-market documentation, and dangerous-goods classification before quotation or shipment.
What should be checked before applying Water-Based Fluorocarbon Matte Topcoat?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, relative humidity, ventilation, mixing requirements, and recoat interval before application.
What should be checked before applying Water-Based Fluorocarbon Matte Topcoat?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Water-Based Fluorocarbon Matte Topcoat be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Water-Based Fluorocarbon Matte Topcoat be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Manufacturer & Product Data Source
This page is maintained by Shandong Qilu Paints Co., Ltd. for international buyers and is based on Qilu Paints legacy technical product records. Confirm current TDS/SDS, export classification, packaging, shelf life, color, and destination-market requirements with the sales and technical team before quotation, specification, or shipment.
Disclaimer
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.