Квалификация службы погружения
Процедура проверки с высокой степенью ответственности при погружении в воду, контакте с жидкостью, облицовке резервуара и аналогичных услугах.
Применимые стандарты
Быстрое направление подбора покрытия
Начните здесь до технической квалификации
Используйте эти первичные ориентиры для выбора примерного типа покрытия. Окончательный подбор зависит от основания, подготовки поверхности, условий эксплуатации, стандартов и документов.
Bridge splash zone, wet/dry alternating zone, or underwater-adjacent steel
Сначала квалификацияEpoxy glass flake or high-build epoxy immersion-grade route after service review
Use when ordinary atmospheric steel systems are not enough because water exposure may dominate the failure mode.
Примеры продуктов для проверки
Immersion, tank lining, underwater steel, sewage-contact surface, or potable-water-adjacent request
Сначала квалификацияImmersion-grade epoxy or specialty lining only after technical qualification
Use when liability is high; this page should collect details rather than auto-recommend a final system.
Примеры продуктов для проверки
Другие варианты этого семейства
Детали технической квалификации
Для кого
- Immersion areas
- Tank interiors
- Liquid-contact surfaces
Объекты и основания
- Immersion areas
- Tank interiors
- Liquid-contact surfaces
- Substrate: Steel
- Substrate: Concrete
Распространённые риски отказа
- Water or immersion
- Chemical exposure
Вопросы для подбора
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Подготовка поверхности
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Условия нанесения
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Цвета и упаковка
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Доступная документация
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Ссылки на базу продуктов
Продукты для дальнейшей проверки
Системы Essential / Standard / Extended
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Маршруты поставки и сотрудничества
Route E: Project & Tender Support
EPCs, general contractors, asset owners, designers, specification teams, and major maintenance projects.
Specification review · System recommendation · Document package · Samples · Project quotation · Local installation and site service by qualified partners
Что Qilu может предоставить
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
Что Qilu не может предоставить
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
- Automatically recommend tank lining, potable-water, immersion, fire-rating, ESD, hygiene, or chemical-resistance systems without qualification
Нужна индивидуальная антикоррозионная система?
Наша техническая команда поможет подобрать систему покрытия под вашу среду эксплуатации, основание и требования к долговечности.
Связаться с технической командой