Calificación de revestimiento de acero de instalaciones portuarias
Ruta de revisión técnica para acero portuario expuesto a sal, humedad, abrasión y duras condiciones de mantenimiento.
Normas aplicables
Orientación rápida de recubrimiento
Empiece aquí antes de la calificación técnica
Use estas primeras orientaciones para elegir una familia aproximada de recubrimientos. La selección final depende del sustrato, la preparación de superficie, la exposición, las normas y los documentos.
Port machinery, harbor structures, and non-sealed heavy steel boxes
Epoxy zinc-rich primer plus high-build epoxy or epoxy MIO plus polyurethane topcoat
Use for heavy steel near marine humidity, handling damage, and maintenance access constraints.
Ejemplos de productos para verificar
Port crane cab, machinery room exterior, and operator-facing port equipment surfaces
General epoxy primer plus polyurethane topcoat after color and gloss confirmation
Use for port-equipment areas where appearance, UV exposure, and maintenance repainting are part of the request.
Ejemplos de productos para verificar
Offshore wind tower, jacket, monopile, splash zone, or seawater immersion area
Calificación primeroEpoxy zinc-rich primer, high-build epoxy, epoxy glass flake, and polyurethane topcoat depending on zone
Use as a qualification route because atmospheric, splash, tidal, and immersion zones require different systems.
Ejemplos de productos para verificar
Otras entradas de esta familia
Detalles de calificación técnica
Para quién es
- Port steelwork
- Cranes
- Harbor structures
Activos y sustratos
- Port steelwork
- Cranes
- Harbor structures
- Substrate: Carbon steel
- Substrate: Old coating
Riesgos de fallo habituales
- Atmospheric corrosion
- Water or immersion
- Impact and abrasion
Preguntas de selección
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Preparación de superficie
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Condiciones de aplicación
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Colores y embalaje
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Documentación disponible
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Enlaces a la base de productos
Páginas de productos para verificar
Imprimación epóxica rica en zinc 80
Epoxy Anti-Corrosion
Imprimación epóxica rica en zinc 70
Epoxy Anti-Corrosion
Imprimación epóxica rica en zinc 1503
Epoxy Anti-Corrosion
Imprimación inorgánica rica en zinc
Specialty Coatings
Imprimación epóxica 1000
Epoxy Anti-Corrosion
Epoxy MIO Intermediate Coat 1010E
Epoxy Anti-Corrosion
Epoxy MIO Intermediate High Build
Epoxy Anti-Corrosion
Acabado epóxico 1015
Epoxy Anti-Corrosion
Sistemas Essential / Standard / Extended
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Rutas de suministro y colaboración
Route E: Project & Tender Support
EPCs, general contractors, asset owners, designers, specification teams, and major maintenance projects.
Specification review · System recommendation · Document package · Samples · Project quotation · Local installation and site service by qualified partners
Route B: System Package Supply
Primer-intermediate-topcoat sets, floor systems, corrosion systems, quantity estimation, and system sequence requests.
System schedule · Product matching · Theoretical consumption · Application sequence · Basic quality-control checklist
Lo que Qilu puede proporcionar
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
Lo que Qilu no puede proporcionar
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
- Automatically recommend tank lining, potable-water, immersion, fire-rating, ESD, hygiene, or chemical-resistance systems without qualification
¿Necesita una solución anticorrosiva personalizada?
Nuestro equipo técnico puede diseñar el sistema de recubrimiento anticorrosivo óptimo según su ambiente específico y condiciones de uso.
Contactar al equipo técnico