Rutas de revestimiento de instalaciones de centrales eléctricas
Revise las opciones de recubrimiento para acero, tuberías, exteriores de equipos y zonas de mantenimiento de instalaciones eléctricas.
Normas aplicables
Orientación rápida de recubrimiento
Empiece aquí antes de la calificación técnica
Use estas primeras orientaciones para elegir una familia aproximada de recubrimientos. La selección final depende del sustrato, la preparación de superficie, la exposición, las normas y los documentos.
Power plant steel, boiler house steel, coal sheds, and conveyor structures
Epoxy zinc-rich primer plus epoxy MIO/high-build intermediate plus polyurethane topcoat
Use for ordinary atmospheric steel in power facilities before checking heat or chemical exposure.
Ejemplos de productos para verificar
Cooling tower or chimney exterior with concrete or steel protective coating needs
Calificación primeroEpoxy sealer or epoxy MIO system plus polyurethane, polysiloxane, or suitable weathering topcoat after substrate review
Use when moisture, condensation, concrete condition, and exterior weathering all need to be separated.
Ejemplos de productos para verificar
Otras entradas de esta familia
Detalles de calificación técnica
Para quién es
- Power plant steel
- Pipework
- Equipment exteriors
Activos y sustratos
- Power plant steel
- Pipework
- Equipment exteriors
- Substrate: Carbon steel
- Substrate: Old coating
Riesgos de fallo habituales
- Atmospheric corrosion
- Heat
- Chemical exposure
Preguntas de selección
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Preparación de superficie
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Condiciones de aplicación
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Colores y embalaje
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Documentación disponible
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Enlaces a la base de productos
Páginas de productos para verificar
Imprimación epóxica rica en zinc 80
Epoxy Anti-Corrosion
Imprimación epóxica rica en zinc 70
Epoxy Anti-Corrosion
Imprimación epóxica rica en zinc 1503
Epoxy Anti-Corrosion
Imprimación inorgánica rica en zinc
Specialty Coatings
Imprimación epóxica 1000
Epoxy Anti-Corrosion
Epoxy MIO Intermediate Coat 1010E
Epoxy Anti-Corrosion
Epoxy MIO Intermediate High Build
Epoxy Anti-Corrosion
Acabado epóxico 1015
Epoxy Anti-Corrosion
Sistemas Essential / Standard / Extended
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Maintenance / Surface-Tolerant
Maintenance work where full blasting is limited and old coating may remain.
- Identify old coating and remaining corrosion
- Use compatible maintenance primers only after review
Loose rust, oil, salts, powdery coating, and weak old film still need removal.
Rutas de suministro y colaboración
Route E: Project & Tender Support
EPCs, general contractors, asset owners, designers, specification teams, and major maintenance projects.
Specification review · System recommendation · Document package · Samples · Project quotation · Local installation and site service by qualified partners
Route B: System Package Supply
Primer-intermediate-topcoat sets, floor systems, corrosion systems, quantity estimation, and system sequence requests.
System schedule · Product matching · Theoretical consumption · Application sequence · Basic quality-control checklist
Lo que Qilu puede proporcionar
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
Lo que Qilu no puede proporcionar
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
¿Necesita una solución anticorrosiva personalizada?
Nuestro equipo técnico puede diseñar el sistema de recubrimiento anticorrosivo óptimo según su ambiente específico y condiciones de uso.
Contactar al equipo técnico