Sols industriels et solutions de revêtement de béton
Adaptez la protection des sols et du béton aux contraintes de circulation, d’abrasion, de nettoyage, d’hygiène, de temps d’arrêt, d’humidité et d’utilisation en intérieur.
Normes applicables
Orientation rapide du revêtement
Commencez ici avant la qualification technique
Utilisez ces premières orientations pour choisir une famille de revêtements. Le système final dépend toujours du support, de la préparation de surface, de l’exposition, des normes et des documents.
Famille d’actifs
Industrial Floors & Concrete
Principaux risques
Impact and abrasion, Chemical exposure, Hygiene or cleanability
Priorités commerciales
Essential, Standard, Extended Service
Entrées de sélection
Applications courantes de cette famille d’actifs
Warehouse floor with forklift or pedestrian traffic
Epoxy floor primer plus epoxy floor topcoat; concrete hardener where appropriate
Workshop floor with abrasion, impact, or heavier traffic
Epoxy mortar, epoxy intermediate, self-leveling epoxy, or wear-resistant polyurethane floor topcoat
Parking garage floor, ramp, or vehicle traffic area
Epoxy primer plus epoxy or polyurethane wear layer, with anti-slip aggregate when required
Commercial space or light-duty concrete floor
Acrylic floor paint or epoxy floor coating depending on traffic and downtime
Food, pharmaceutical, or cleanable production floor
Low-odor epoxy, waterborne epoxy, or polyurethane floor system after hygiene review
Indoor floor project with VOC, odor, or occupied-building restrictions
Waterborne epoxy, waterborne acrylic, or lower-VOC floor system
Concrete protection where traffic is secondary
Epoxy sealer, concrete protective coating, or compatible architectural/mineral finish
Détails de qualification technique
Pour qui
- Warehouses
- Workshops
- Parking garages
- Food and pharmaceutical areas
- Commercial spaces
- Concrete protection
Actifs et supports
- Warehouses
- Workshops
- Parking garages
- Food and pharmaceutical areas
- Commercial spaces
- Concrete protection
- Substrate: Concrete
- Substrate: Cement mortar
- Substrate: Old floor coating after review
Risques de défaillance courants
- Impact and abrasion
- Chemical exposure
- Hygiene or cleanability
- VOC and indoor-use restrictions
Questions de sélection
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Préparation de surface
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Conditions d’application
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Couleurs et conditionnement
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Documentation disponible
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Systèmes Essential / Standard / Extended
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Fast Throughput
Factory coating where drying, handling, packing, or dispatch speed affects production.
- Confirm line speed and handling time
- Review fast-drying or bake-capable options
Run sample trials before repeat supply.
Lower-VOC
Indoor or regulated projects where odor, VOC limits, or worker exposure matter.
- Check local VOC limits and document requirements
- Review waterborne or lower-VOC options
Application temperature, humidity, and ventilation become especially important.
Parcours d’approvisionnement et de partenariat
Route B: System Package Supply
Primer-intermediate-topcoat sets, floor systems, corrosion systems, quantity estimation, and system sequence requests.
System schedule · Product matching · Theoretical consumption · Application sequence · Basic quality-control checklist
Route E: Project & Tender Support
EPCs, general contractors, asset owners, designers, specification teams, and major maintenance projects.
Specification review · System recommendation · Document package · Samples · Project quotation · Local installation and site service by qualified partners
Route D: Distributor Partnership
Local importers, industrial distributors, building-material channels, and specialist application-material sellers.
Starter portfolio · Regional price structure · Samples and marketing materials · Basic training · Lead protection · Non-exclusive pilot · Regional cooperation after validation
Ce que Qilu peut fournir
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
Ce que Qilu ne peut pas fournir
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
Besoin d’une solution anticorrosion personnalisée ?
Notre équipe technique peut concevoir le système de revêtement anticorrosion optimal selon votre environnement spécifique et vos conditions d’utilisation.
Contacter l’équipe technique