Solutions de revêtement pour l'acier de construction et les infrastructures
Sélectionnez des systèmes de revêtement de projet pour les structures en acier, les ponts, les supports de canalisations, les ports, les installations de transmission et les infrastructures exposées.
Normes applicables
Orientation rapide du revêtement
Commencez ici avant la qualification technique
Utilisez ces premières orientations pour choisir une famille de revêtements. Le système final dépend toujours du support, de la préparation de surface, de l’exposition, des normes et des documents.
Famille d’actifs
Structural Steel & Infrastructure
Principaux risques
Atmospheric corrosion, UV and weathering, Water or immersion
Priorités commerciales
Standard, Extended Service, Maintenance / Surface-Tolerant
Entrées de sélection
Applications courantes de cette famille d’actifs
Indoor structural steel in low-corrosion service
Alkyd primer/topcoat for economy, or epoxy primer plus epoxy topcoat for higher durability
Outdoor steel workshops, exposed steel buildings, and general pipe racks
Epoxy zinc-rich or epoxy primer plus epoxy MIO intermediate plus polyurethane topcoat
Bridge steel box girders, bridge attachments, guardrails, and exposed bridge steel
Epoxy zinc-rich or inorganic zinc primer plus epoxy sealer/MIO intermediate plus polyurethane or fluorocarbon topcoat
Municipal viaduct steel and bridge-adjacent steel in atmospheric exposure
Solvent-based or waterborne zinc/epoxy primer plus epoxy MIO intermediate plus polyurethane or fluorocarbon finish
Sealed bridge-box interiors and enclosed steel cavities
High-build epoxy, with zinc-rich primer considered when specified
Bridge deck steel primer or anti-slip friction surface
Inorganic zinc or epoxy zinc-rich primer after specification review
Bridge splash zone, wet/dry alternating zone, or underwater-adjacent steel
Epoxy glass flake or high-build epoxy immersion-grade route after service review
Architectural or building steel requiring both fire protection and anti-corrosion coating
Compatible anti-corrosion primer plus intumescent or non-intumescent fireproof coating plus approved finish where required
Port machinery, harbor structures, and non-sealed heavy steel boxes
Epoxy zinc-rich primer plus high-build epoxy or epoxy MIO plus polyurethane topcoat
Port crane cab, machinery room exterior, and operator-facing port equipment surfaces
General epoxy primer plus polyurethane topcoat after color and gloss confirmation
Power transmission steel, galvanized structures, and outdoor utility steel
Compatible epoxy tie coat or zinc-rich primer plus acrylic or polyurethane topcoat
Coastal C5 structural steel, ports, pipe bridges, and very humid outdoor structures
High-zinc primer plus epoxy MIO/high-build intermediate plus polyurethane or fluorocarbon topcoat
Maintenance repainting where blasting is limited or old coating remains
Surface-tolerant epoxy or rust-tolerant primer plus polyurethane or compatible topcoat
Détails de qualification technique
Pour qui
- Steel structure workshops
- Bridges
- Pipe racks
- Transmission assets
- Port facilities
- Outdoor steel structures
Actifs et supports
- Steel structure workshops
- Bridges
- Pipe racks
- Transmission assets
- Port facilities
- Outdoor steel structures
- Substrate: Carbon steel
- Substrate: Shop-primed steel
- Substrate: Galvanized steel after review
- Substrate: Concrete adjacent areas
Risques de défaillance courants
- Atmospheric corrosion
- UV and weathering
- Water or immersion
Questions de sélection
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Préparation de surface
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Conditions d’application
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Couleurs et conditionnement
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Documentation disponible
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Systèmes Essential / Standard / Extended
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Lower-VOC
Indoor or regulated projects where odor, VOC limits, or worker exposure matter.
- Check local VOC limits and document requirements
- Review waterborne or lower-VOC options
Application temperature, humidity, and ventilation become especially important.
Maintenance / Surface-Tolerant
Maintenance work where full blasting is limited and old coating may remain.
- Identify old coating and remaining corrosion
- Use compatible maintenance primers only after review
Loose rust, oil, salts, powdery coating, and weak old film still need removal.
Parcours d’approvisionnement et de partenariat
Route B: System Package Supply
Primer-intermediate-topcoat sets, floor systems, corrosion systems, quantity estimation, and system sequence requests.
System schedule · Product matching · Theoretical consumption · Application sequence · Basic quality-control checklist
Route E: Project & Tender Support
EPCs, general contractors, asset owners, designers, specification teams, and major maintenance projects.
Specification review · System recommendation · Document package · Samples · Project quotation · Local installation and site service by qualified partners
Route D: Distributor Partnership
Local importers, industrial distributors, building-material channels, and specialist application-material sellers.
Starter portfolio · Regional price structure · Samples and marketing materials · Basic training · Lead protection · Non-exclusive pilot · Regional cooperation after validation
Ce que Qilu peut fournir
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
Ce que Qilu ne peut pas fournir
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
Besoin d’une solution anticorrosion personnalisée ?
Notre équipe technique peut concevoir le système de revêtement anticorrosion optimal selon votre environnement spécifique et vos conditions d’utilisation.
Contacter l’équipe technique