Examen du revêtement en acier pour transmission de puissance
Pour les pylônes, l'acier des sous-stations et les actifs liés à la transmission où l'accès pour la maintenance et l'exposition extérieure façonnent le système.
Normes applicables
Orientation rapide du revêtement
Commencez ici avant la qualification technique
Utilisez ces premières orientations pour choisir une famille de revêtements. Le système final dépend toujours du support, de la préparation de surface, de l’exposition, des normes et des documents.
Power transmission steel, galvanized structures, and outdoor utility steel
Compatible epoxy tie coat or zinc-rich primer plus acrylic or polyurethane topcoat
Use when substrate may include galvanized steel and exterior color retention is needed.
Exemples de produits à vérifier
Wind turbine tower interior or exterior in onshore service
High-build epoxy or epoxy zinc-rich primer plus epoxy intermediate plus polyurethane topcoat; waterborne route where specified
Use when tower sections, interior cavities, and exterior weathering need repeatable factory coating and documentation.
Exemples de produits à vérifier
Galvanized steel or stainless components in power and utility facilities
Qualification d’abordCompatible epoxy tie coat or primer plus epoxy intermediate and polyurethane finish
Use when adhesion to galvanized or stainless substrate is the main risk before weathering performance.
Exemples de produits à vérifier
Autres entrées de cette famille
Détails de qualification technique
Pour qui
- Transmission towers
- Substation steel
- Utility steelwork
Actifs et supports
- Transmission towers
- Substation steel
- Utility steelwork
- Substrate: Galvanized steel after review
- Substrate: Weathered steel
- Substrate: Old coating
Risques de défaillance courants
- Atmospheric corrosion
- UV and weathering
Questions de sélection
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Préparation de surface
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Conditions d’application
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Couleurs et conditionnement
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Documentation disponible
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Liens vers la base produits
Produits à vérifier ensuite
Primaire époxy riche en zinc 80
Epoxy Anti-Corrosion
Primaire époxy riche en zinc 70
Epoxy Anti-Corrosion
Primaire époxy riche en zinc 1503
Epoxy Anti-Corrosion
Primaire inorganique riche en zinc
Specialty Coatings
Primaire époxy 1000
Epoxy Anti-Corrosion
Epoxy MIO Intermediate Coat 1010E
Epoxy Anti-Corrosion
Epoxy MIO Intermediate High Build
Epoxy Anti-Corrosion
Finition époxy 1015
Epoxy Anti-Corrosion
Systèmes Essential / Standard / Extended
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Maintenance / Surface-Tolerant
Maintenance work where full blasting is limited and old coating may remain.
- Identify old coating and remaining corrosion
- Use compatible maintenance primers only after review
Loose rust, oil, salts, powdery coating, and weak old film still need removal.
Parcours d’approvisionnement et de partenariat
Route E: Project & Tender Support
EPCs, general contractors, asset owners, designers, specification teams, and major maintenance projects.
Specification review · System recommendation · Document package · Samples · Project quotation · Local installation and site service by qualified partners
Route D: Distributor Partnership
Local importers, industrial distributors, building-material channels, and specialist application-material sellers.
Starter portfolio · Regional price structure · Samples and marketing materials · Basic training · Lead protection · Non-exclusive pilot · Regional cooperation after validation
Ce que Qilu peut fournir
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
Ce que Qilu ne peut pas fournir
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
Besoin d’une solution anticorrosion personnalisée ?
Notre équipe technique peut concevoir le système de revêtement anticorrosion optimal selon votre environnement spécifique et vos conditions d’utilisation.
Contacter l’équipe technique