Anti Static Epoxy Floor Putty
Overview
Anti Static Epoxy Floor Putty is a putty putty designed for flooring, traffic or road-marking service.
Recommended Uses
- Suitable for leveling, repairing and preparing interior and exterior mineral substrates, concrete, mortar and prepared wall surfaces before compatible primers and finish coats.
Technical Data
| Product Family | Specialty |
| Coating Layer | All |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | Suitable for leveling, repairing and preparing interior and exterior mineral substrates, concrete, mortar and prepared wall surfaces before... |
| Color | black, gray |
| Surface Dry | <=2h hard dry<=24h |
| Hard Dry | <=24h |
| Theoretical Consumption | 0.8-1.2kg/m2·mm |
Confirm current TDS/SDS, packaging, shelf life, export classification, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSApplication Guide
| Surface Preparation | The substrate shall be sound, dry, clean and fully cured. Remove dust, laitance, grease, loose layers, mildew and other contaminants; repair cracks or uneven areas before coating. |
| Application Environment | Apply with application temperature 5-35 deg C; relative humidity <= 85%; substrate temperature at least 3 deg C above the dew point; adequate ventilation. |
| Application Method | Apply by airless spray, air spray, brush, roller. Mix, thin and recoat according to site conditions and the coating system requirements. |
Export & Storage Notes
| Packaging | 16.5:3.5 |
| Safety | Confirm substrate condition, compatibility, mixing ratio and application environment before large-area work. Provide good ventilation, keep away from sparks and open flames, and use appropriate personal protective equipment. Do not use material that has exceeded its pot life or has gelled after mixing. Store sealed in a cool, dry and ventilated place and dispose of waste according to local regulations. |
Compatible Products
Product FAQ
Can I request the current TDS and SDS for Anti Static Epoxy Floor Putty?
Yes. Contact the Qilu Paints export team with the product name, destination country, substrate, coating system, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Anti Static Epoxy Floor Putty be selected for an export project?
Confirm substrate preparation, exposure environment, target durability, compatible primer/intermediate/topcoat, destination-market documentation, and dangerous-goods classification before quotation or shipment.
What should be checked before applying Anti Static Epoxy Floor Putty?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, relative humidity, ventilation, mixing requirements, and recoat interval before application.
What should be checked before applying Anti Static Epoxy Floor Putty?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Anti Static Epoxy Floor Putty be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Anti Static Epoxy Floor Putty be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Manufacturer & Product Data Source
This page is maintained by Shandong Qilu Paints Co., Ltd. for international buyers and is based on Qilu Paints legacy technical product records. Confirm current TDS/SDS, export classification, packaging, shelf life, color, and destination-market requirements with the sales and technical team before quotation, specification, or shipment.
Disclaimer
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.