Epoxy MIO Intermediate High Build
Overview
Two-component high-build epoxy MIO intermediate coat formulated with epoxy resin, micaceous iron oxide pigment, extenders, and polyamide hardener. Single-coat high film build for efficient application.
Recommended Uses
- Suitable as an intermediate barrier coat between compatible primers and topcoats on interior and exterior mineral substrates, concrete, mortar and prepared wall surfaces in industrial and heavy-duty anti-corrosion service.
Best For
- steel structure protection
- industrial floor systems
- heavy-duty anti-corrosion projects
Buyer Benefits
- strong adhesion to prepared substrates
- good chemical resistance
- suitable for multi-coat protective systems
Key Features
- strong adhesion to prepared substrates
- good chemical resistance
- suitable for multi-coat protective systems
Typical Coating System
Typical epoxy system: epoxy primer, optional epoxy intermediate coat, and polyurethane or fluorocarbon topcoat when exterior color and weather resistance are required.
Technical Data
| Product Family | Epoxy |
| Coating Layer | Mid |
| Component System | 2K system, confirm mixing ratio from current TDS |
| Recommended Use Snapshot | Suitable as an intermediate barrier coat between compatible primers and topcoats on interior and exterior mineral substrates, concrete,... |
| Typical System | Typical epoxy system: epoxy primer, optional epoxy intermediate coat, and polyurethane or fluorocarbon topcoat when exterior color and weather resistance are required. |
| Color | gray |
| Non-Volatile Content | 75±2% |
| Wet Film Thickness | 100-167microns |
| Dry Film Thickness | 75-125microns |
| Theoretical Spreading Rate | approx.4.76m2/kg |
Confirm current TDS/SDS, packaging, shelf life, export classification, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSApplication Guide
| Surface Preparation | Steel or metal surfaces shall be dry, clean and free from oil, dust, mill scale and loose rust. Use the specified hand-tool, power-tool or blast-cleaning grade according to the coating system and service environment. |
| Application Environment | Apply with application temperature 5-40 deg C; relative humidity <= 85% where applicable; substrate temperature at least 3 deg C above the dew point; adequate ventilation. |
| Application Method | Apply by airless spray, spray, brush. Recommended dry film thickness: 75-125microns. Mix, thin and recoat according to site conditions and the coating system requirements. |
Export & Storage Notes
| Safety | Confirm substrate condition, compatibility, mixing ratio and application environment before large-area work. Provide good ventilation, keep away from sparks and open flames, and use appropriate personal protective equipment. Do not use material that has exceeded its pot life or has gelled after mixing. Store sealed in a cool, dry and ventilated place and dispose of waste according to local regulations. |
Compatible Products
Alkyd Rust Tolerant Primer 6525
PrimerEpoxy Rust-Tolerant Primer 1001
PrimerEpoxy Sealing Primer 1004B
TopcoatChlorinated Rubber Coating System
TopcoatFluorocarbon Weather-Resistant Topcoat for Steel Structures 8005
TopcoatHigh-Performance Aliphatic Polyurethane Topcoat 7008
TopcoatHigh-Performance Polyurethane Topcoat
TopcoatPolyurethane Topcoat
Related Solutioncorrosion-c4-high
Related Solutioncorrosion-c5-very-high
Related Solutionindustry-bridge-steel
Related Solutionindustry-oil-tank
Product FAQ
Can I request the current TDS and SDS for Epoxy MIO Intermediate High Build?
Yes. Contact the Qilu Paints export team with the product name, destination country, substrate, coating system, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Epoxy MIO Intermediate High Build be selected for an export project?
Confirm substrate preparation, exposure environment, target durability, compatible primer/intermediate/topcoat, destination-market documentation, and dangerous-goods classification before quotation or shipment.
What should be checked before applying Epoxy MIO Intermediate High Build?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, relative humidity, ventilation, mixing requirements, and recoat interval before application.
What should be checked before applying Epoxy MIO Intermediate High Build?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Epoxy MIO Intermediate High Build be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Epoxy MIO Intermediate High Build be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Manufacturer & Product Data Source
This page is maintained by Shandong Qilu Paints Co., Ltd. for international buyers and is based on Qilu Paints legacy technical product records. Confirm current TDS/SDS, export classification, packaging, shelf life, color, and destination-market requirements with the sales and technical team before quotation, specification, or shipment.
Disclaimer
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.