High-Solids All-in-One Primer & Base Coat
Description
High-Solids All-in-One Primer & Base Coat is a specialty primer used for industrial protective and decorative coating projects.
Recommended Uses
- Suitable as a protective and decorative topcoat on interior and exterior mineral substrates, concrete, mortar and prepared wall surfaces in weather-exposed protective and decorative service.
Best For
- industrial protective and decorative coating projects
- export coating inquiries
- TDS/SDS technical review
Technical Specifications
| Product Family | Specialty |
| Coating Layer | Primer |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | Suitable as a protective and decorative topcoat on interior and exterior mineral substrates, concrete, mortar and prepared wall surfaces in... |
| Container Status | no hard lumps; uniform condition after stirring |
| Appearance | normal |
Confirm current TDS/SDS, packaging, shelf life, and destination-country requirements before quotation or shipment.
Request Current TDS/SDSPerformance
| Water Resistance | no abnormality (96h) |
| Alkali Resistance | no abnormality (96h) |
Application
| Surface Preparation | The substrate shall be sound, dry, clean and fully cured. Remove dust, laitance, grease, loose layers, mildew and other contaminants; repair cracks or uneven areas before coating. |
| Application Environment | Apply with application temperature 5-35 deg C; relative humidity <= 85%. |
| Application Method | Apply by spray, roller. Use compatible thinner/cleaner such as clean water where permitted where specified. Mix, thin and recoat according to site conditions and the coating system requirements. |
Storage and Delivery
| Safety | Confirm substrate condition, compatibility, mixing ratio and application environment before large-area work. Protect from freezing, rain, contamination and direct exposure before the film is fully dry. Store sealed in a cool, dry and ventilated place and dispose of waste according to local regulations. |
Compatible Products
Clear Protective Topcoats
Elastic Exterior Coating(High Elasticity)
Elastic Exterior Coating(Medium Elasticity)
Elastomeric Textured Masonry Coating
Product FAQ
Can I request the current TDS and SDS for High-Solids All-in-One Primer & Base Coat?
Yes. Contact the Qilu Paints export team with the product name, destination country, substrate, coating system, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should High-Solids All-in-One Primer & Base Coat be selected for an export project?
Confirm substrate preparation, exposure environment, target durability, compatible primer/intermediate/topcoat, destination-market documentation, and dangerous-goods classification before quotation or shipment.
What should be checked before applying High-Solids All-in-One Primer & Base Coat?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, relative humidity, ventilation, mixing requirements, and recoat interval before application.
How should High-Solids All-in-One Primer & Base Coat be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened High-Solids All-in-One Primer & Base Coat be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Manufacturer & Product Data Source
This page is maintained by Shandong Qilu Paints Co., Ltd. for international buyers and is based on Qilu Paints legacy technical product records. Confirm current TDS/SDS, export classification, packaging, shelf life, color, and destination-market requirements with the sales and technical team before quotation, specification, or shipment.
Disclaimer
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.