Water-Based Polymer Glazed Enamel
Description
This product is formulated with Dow emulsion from the United States, offering environmental friendliness and excellent stain resistance.
Best For
- projects with low-VOC requirements
- waterborne steel protection
- environmental compliance requests
Buyer Benefits
- reduced solvent odor
- waterborne handling profile
- useful where VOC reduction is part of the specification
Key Features
- Usable hardness up to HB.
- Good stain resistance with strong adhesion of the paint film.
- Excellent color retention and high paint film thickness.
- Green and environmentally friendly with no pollution, produced using purified water, and simple and convenient for application.
Typical Coating System
Typical waterborne system: waterborne primer and compatible waterborne topcoat selected according to substrate and exposure environment.
Technical Specifications
| Product Family | Waterborne |
| Coating Layer | Top |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | projects with low-VOC requirements, waterborne steel protection |
| Typical System | Typical waterborne system: waterborne primer and compatible waterborne topcoat selected according to substrate and exposure environment. |
Confirm current TDS/SDS, packaging, shelf life, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSApplication Guide
| Application Method | Water-based high-penetration primer: Spray/roll on one coat. Theoretical consumption: 5㎡/KG. Water-based polymer glazed enamel: Spray on two coats. Theoretical consumption: 3.5 - 4㎡/KG. 1. New Walls (Unpainted) Ensure that the wall is fully dry. Concrete and plastered walls should have sufficient curing time. Wall humidity: The humidity of brick and mortar walls should be below 10%. Alkalinity of cement walls: The pH value of concrete and cement mortar walls should be below 10. Use appropriate tools to remove mortar residues and protruding parts from the wall surface. For small grease stains, dirt, and dust, clean with a neutral cleaner or solvent, or wipe with a damp cloth to thoroughly remove all stains. For large cracks and depressions on the wall, repair with cement mortar. For small holes and cracks that cannot be filled with paint, use a special exterior wall waterproof putty for repairs (preferably repair locally). After using repair materials, ensure the wall is thoroughly dry and sanded smooth. 2. Old Walls (Unpainted) First, inspect the wall condition and treat surface defects using the methods mentioned above. Remove any floating dust accumulated on the wall. For mildew or moss on the wall, use high-pressure water to remove it, then clean with a 10% bleach solution, rinse with clean water, and dry. 3. Old Walls (Painted with Latex Paint) If the original coating is intact but has chalking due to erosion, remove the chalking layer using a high-pressure water gun and allow it to dry. If the old paint film is partially damaged, use appropriate tools to remove the damaged paint film up to the edge of the remaining intact portion and smooth the surface. If the old paint film is damaged and shows chalking, scrape it off, smooth the surface, and apply a sealing primer from Baotashan brand. If the old paint film has a textured surface and is firmly attached, it can be directly recoated; otherwise, use sandblasting for treatment. |
Compatible Products
Product FAQ
Can I request the current TDS and SDS for Water-Based Polymer Glazed Enamel?
Yes. Contact the Qilu Paints export team with the product name, destination country, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Water-Based Polymer Glazed Enamel be selected for a coating system?
Confirm substrate, exposure environment, required durability, compatible primer or topcoat, and destination-market documentation before quotation or shipment.
What should be checked before applying Water-Based Polymer Glazed Enamel?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, and relative humidity before application. Stir thoroughly before use.
How should Water-Based Polymer Glazed Enamel be stored and handled?
Store sealed containers in a cool, dry, ventilated area away from heat, sparks, and direct sunlight. Follow the current SDS for PPE, ventilation, fire prevention, and waste disposal.
What should be checked before applying Water-Based Polymer Glazed Enamel?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Water-Based Polymer Glazed Enamel be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Water-Based Polymer Glazed Enamel be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Product Data Source
This product page is generated from Qilu Paints legacy technical product records. Confirm SDS, TDS, export classification, packaging, and destination-market requirements with the sales and technical team before quotation or shipment.
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.