Water-Based Epoxy Floor Primer
Overview
Water-Based Epoxy Floor Primer is a epoxy primer designed for flooring, traffic or road-marking service.
Recommended Uses
- Suitable as a primer on concrete floors, road surfaces and prepared mineral substrates before compatible intermediate coats or topcoats in flooring, traffic or road-marking service.
Technical Data
| Product Family | Waterborne |
| Coating Layer | Primer |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | Suitable as a primer on concrete floors, road surfaces and prepared mineral substrates before compatible intermediate coats or topcoats in... |
| Color | gray |
| Surface Dry | <=2h hard dry<=12h |
| Hard Dry | <=12h |
| Theoretical Consumption | 0.1-0.2kg/m2 |
Confirm current TDS/SDS, packaging, shelf life, export classification, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSPerformance Data
| Adhesion (Cross-Cut) | >=1.5MPa |
Application Guide
| Surface Preparation | The surface shall be dry, clean, firm and free from oil, dust, loose material and standing water. Concrete or road surfaces shall be properly cured and mechanically prepared where required. |
| Application Environment | Apply with application temperature 5-35 deg C; relative humidity <= 85%; substrate temperature at least 3 deg C above the dew point. |
| Application Method | Apply by brush, roller, spray. Use compatible thinner/cleaner such as clean water where permitted where specified. Mix, thin and recoat according to site conditions and the coating system requirements. |
Export & Storage Notes
| Packaging | 10:20 |
| Safety | Confirm substrate condition, compatibility, mixing ratio and application environment before large-area work. Protect from freezing, rain, contamination and direct exposure before the film is fully dry. Do not use material that has exceeded its pot life or has gelled after mixing. Store sealed in a cool, dry and ventilated place and dispose of waste according to local regulations. |
Compatible Products
Epoxy MIO Intermediate Coat 1010E
IntermediateEpoxy MIO Intermediate Coat H1100C
IntermediateEpoxy MIO Intermediate High Build
IntermediateWater-Based Epoxy Floor Intermediate Coat
IntermediateWater-Based Epoxy Intermediate Coat for Bridges and Tunnels
TopcoatFluorocarbon Weather-Resistant Topcoat for Steel Structures 8005
TopcoatHigh-Performance Aliphatic Polyurethane Topcoat 7008
TopcoatHigh-Performance Polyurethane Topcoat
TopcoatPolyurethane Topcoat
TopcoatWater-Based Epoxy Floor Matte White Topcoat
Product FAQ
Can I request the current TDS and SDS for Water-Based Epoxy Floor Primer?
Yes. Contact the Qilu Paints export team with the product name, destination country, substrate, coating system, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Water-Based Epoxy Floor Primer be selected for an export project?
Confirm substrate preparation, exposure environment, target durability, compatible primer/intermediate/topcoat, destination-market documentation, and dangerous-goods classification before quotation or shipment.
What should be checked before applying Water-Based Epoxy Floor Primer?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, relative humidity, ventilation, mixing requirements, and recoat interval before application.
What should be checked before applying Water-Based Epoxy Floor Primer?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Water-Based Epoxy Floor Primer be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Water-Based Epoxy Floor Primer be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Manufacturer & Product Data Source
This page is maintained by Shandong Qilu Paints Co., Ltd. for international buyers and is based on Qilu Paints legacy technical product records. Confirm current TDS/SDS, export classification, packaging, shelf life, color, and destination-market requirements with the sales and technical team before quotation, specification, or shipment.
Disclaimer
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.