Epoxy MIO Intermediate Coat 1010E
Overview
Epoxy MIO Intermediate Coat 1010E is a epoxy intermediate designed for industrial and heavy-duty anti-corrosion service.
Recommended Uses
- Suitable as an intermediate barrier coat between compatible primers and topcoats on prepared steel, metal structures, equipment, pipelines and other industrial substrates in industrial and heavy-duty anti-corrosion service.
Best For
- steel structure protection
- industrial floor systems
- heavy-duty anti-corrosion projects
Buyer Benefits
- strong adhesion to prepared substrates
- good chemical resistance
- suitable for multi-coat protective systems
Key Features
- strong adhesion to prepared substrates
- good chemical resistance
- suitable for multi-coat protective systems
Typical Coating System
Typical epoxy system: epoxy primer, optional epoxy intermediate coat, and polyurethane or fluorocarbon topcoat when exterior color and weather resistance are required.
Technical Data
| Product Family | Epoxy |
| Coating Layer | Mid |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | Suitable as an intermediate barrier coat between compatible primers and topcoats on prepared steel, metal structures, equipment, pipelines... |
| Typical System | Typical epoxy system: epoxy primer, optional epoxy intermediate coat, and polyurethane or fluorocarbon topcoat when exterior color and weather resistance are required. |
| Color | gray, dark red |
| Mixing Ratio | 10:1(by weight) |
| Surface Dry | <=1h |
| Hard Dry | <=24h (23±2deg C) |
| Wet Film Thickness | approx.100microns |
| Dry Film Thickness | 55-60microns |
| Theoretical Consumption | approx.200g/m2 |
Confirm current TDS/SDS, packaging, shelf life, export classification, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSApplication Guide
| Surface Preparation | Steel or metal surfaces shall be dry, clean and free from oil, dust, mill scale and loose rust. Use the specified hand-tool, power-tool or blast-cleaning grade according to the coating system and service environment. |
| Application Environment | Apply with application temperature 5-35 deg C; relative humidity <= 85%; substrate temperature at least 3 deg C above the dew point; adequate ventilation; mixed two-component material used within its pot life. |
| Application Method | Apply by airless spray, air spray, spray. Recommended dry film thickness: 55-60microns. Use compatible thinner/cleaner such as approved epoxy thinner where specified. Mix, thin and recoat according to site conditions and the coating system requirements. |
Export & Storage Notes
| Packaging | 10:1 |
| Safety | Confirm substrate condition, compatibility, mixing ratio and application environment before large-area work. Provide good ventilation, keep away from sparks and open flames, and use appropriate personal protective equipment. Do not use material that has exceeded its pot life or has gelled after mixing. Store sealed in a cool, dry and ventilated place and dispose of waste according to local regulations. |
Compatible Products
Alkyd Rust Tolerant Primer 6525
PrimerEpoxy Rust-Tolerant Primer 1001
PrimerEpoxy Sealing Primer 1004B
PrimerEpoxy Zinc Phosphate Primer
TopcoatChlorinated Rubber Coating System
TopcoatFluorocarbon Weather-Resistant Topcoat for Steel Structures 8005
TopcoatHigh-Performance Aliphatic Polyurethane Topcoat 7008
TopcoatHigh-Performance Polyurethane Topcoat
TopcoatPolyurethane Topcoat
Related Solutioncorrosion-c4-high
Related Solutioncorrosion-c5-very-high
Related Solutionindustry-bridge-steel
Related Solutionindustry-oil-tank
Product FAQ
Can I request the current TDS and SDS for Epoxy MIO Intermediate Coat 1010E?
Yes. Contact the Qilu Paints export team with the product name, destination country, substrate, coating system, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Epoxy MIO Intermediate Coat 1010E be selected for an export project?
Confirm substrate preparation, exposure environment, target durability, compatible primer/intermediate/topcoat, destination-market documentation, and dangerous-goods classification before quotation or shipment.
What should be checked before applying Epoxy MIO Intermediate Coat 1010E?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, relative humidity, ventilation, mixing requirements, and recoat interval before application.
What should be checked before applying Epoxy MIO Intermediate Coat 1010E?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Epoxy MIO Intermediate Coat 1010E be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Epoxy MIO Intermediate Coat 1010E be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Manufacturer & Product Data Source
This page is maintained by Shandong Qilu Paints Co., Ltd. for international buyers and is based on Qilu Paints legacy technical product records. Confirm current TDS/SDS, export classification, packaging, shelf life, color, and destination-market requirements with the sales and technical team before quotation, specification, or shipment.
Disclaimer
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.