ISO 12944 C2: низкая коррозионная нагрузка
Системы защиты для умеренно сухих внутренних и слабоагрессивных наружных условий.
Applicable Standards
Environment Definition
ISO 12944 C2 covers low atmospheric corrosivity. It is commonly used for rural outdoor atmospheres with low pollution and for unheated interiors where occasional condensation may occur.
Typical examples include rural warehouses, sports halls, agricultural buildings, protected utility rooms, and general steelwork away from marine or chemical exposure.
Coating Selection Logic
C2 systems should provide better protection than a purely decorative indoor coating while still remaining practical for general steelwork. The key decision is whether the steel will be cleaned by hand/power tools or by abrasive blasting.
Alkyd systems can be suitable for cost-sensitive, low-risk projects. Acrylic or epoxy primers may be reviewed when faster drying, stronger adhesion, or improved maintenance performance is needed.
Starting System Pattern
| Layer | Typical role | Notes |
|---|---|---|
| Surface preparation | Remove oil, dust, mill scale, loose rust, and poorly bonded old coating | St2/St3 may be used for maintenance; abrasive blasting improves durability. |
| Primer | Alkyd anti-rust primer or compatible light industrial primer | Select based on substrate, drying time, and topcoat compatibility. |
| Topcoat | Alkyd enamel, acrylic enamel, or other compatible finish | Required when color retention or appearance matters. |
Technical Review Points
- Confirm whether condensation is occasional or frequent.
- Check if outdoor UV and rain exposure justify a more weather-resistant topcoat.
- Review maintenance access and expected repainting interval.
- Confirm current Qilu Paints TDS/SDS before final specification.
Related Qilu Paints Products
Нужна индивидуальная антикоррозионная система?
Наша техническая команда поможет подобрать систему покрытия под вашу среду эксплуатации, основание и требования к долговечности.
Связаться с технической командой