Revêtements d'entretien des actifs d'utilité générale
Chemin de sélection de maintenance pour les actifs d’utilités industrielles mixtes avec des conditions de préparation de surface et d’exposition variées.
Normes applicables
Orientation rapide du revêtement
Commencez ici avant la qualification technique
Utilisez ces premières orientations pour choisir une famille de revêtements. Le système final dépend toujours du support, de la préparation de surface, de l’exposition, des normes et des documents.
Low-alloy steel in refinery, utility, or chemical-plant exterior service
General epoxy primer plus polyurethane topcoat, upgraded to zinc/epoxy/PU when corrosion class is higher
Use when the asset is not immersed or high-temperature but industrial atmospheric exposure is still expected.
Exemples de produits à vérifier
General industrial equipment and utility maintenance
Alkyd for light duty; epoxy or epoxy/PU system for tougher industrial exposure
Use when the customer has mixed assets and needs a practical maintenance coating direction first.
Exemples de produits à vérifier
Autres entrées de cette famille
Détails de qualification technique
Pour qui
- Industrial equipment
- Utility supports
- Maintenance areas
Actifs et supports
- Industrial equipment
- Utility supports
- Maintenance areas
- Substrate: Steel
- Substrate: Concrete
- Substrate: Old coating
Risques de défaillance courants
- Atmospheric corrosion
- Chemical exposure
- Impact and abrasion
Questions de sélection
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Préparation de surface
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Conditions d’application
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Couleurs et conditionnement
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Documentation disponible
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Liens vers la base produits
Produits à vérifier ensuite
Primaire époxy 1000
Epoxy Anti-Corrosion
Epoxy MIO Intermediate Coat 1010E
Epoxy Anti-Corrosion
Epoxy MIO Intermediate High Build
Epoxy Anti-Corrosion
Finition époxy 1015
Epoxy Anti-Corrosion
Primaire anticorrosion alkyde
Alkyd Paints
Primaire alkyde
Alkyd Paints
Émail alkyde
Alkyd Paints
Alkyde Ready-Mixed finition
Alkyd Paints
Systèmes Essential / Standard / Extended
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Maintenance / Surface-Tolerant
Maintenance work where full blasting is limited and old coating may remain.
- Identify old coating and remaining corrosion
- Use compatible maintenance primers only after review
Loose rust, oil, salts, powdery coating, and weak old film still need removal.
Parcours d’approvisionnement et de partenariat
Route A: Standard Product Supply
Known specifications, standard colors, standard packaging, distributor replenishment, and one-time purchase requests.
Product supply · Current TDS/SDS request support · Packaging and export document checks · Basic application notes
Route B: System Package Supply
Primer-intermediate-topcoat sets, floor systems, corrosion systems, quantity estimation, and system sequence requests.
System schedule · Product matching · Theoretical consumption · Application sequence · Basic quality-control checklist
Ce que Qilu peut fournir
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
Ce que Qilu ne peut pas fournir
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
Besoin d’une solution anticorrosion personnalisée ?
Notre équipe technique peut concevoir le système de revêtement anticorrosion optimal selon votre environnement spécifique et vos conditions d’utilisation.
Contacter l’équipe technique