Pipe Exterior Protection Systems
For above-ground pipe exteriors and utility piping where corrosion, heat, and maintenance access must be reviewed.
Applicable Standards
Quick coating direction
Start here before technical qualification
Use these first-pass directions to choose a rough coating family. Final system selection still depends on substrate, surface preparation, exposure, standards, and documents.
Petrochemical outdoor steel, pipe racks, and above-ground ground pipelines without insulation
Epoxy zinc-rich primer plus epoxy MIO intermediate plus polyurethane topcoat
Use as the standard first direction for refinery and petrochemical steel under atmospheric exposure.
Example product checks
Above-ground pipe exterior and utility pipe racks
Epoxy primer or zinc-rich primer plus epoxy intermediate plus polyurethane topcoat
Use when the line is exterior, non-immersed, and the main issue is atmospheric corrosion.
Example product checks
Other entries in this family
Technical qualification details
Who this is for
- Pipe exteriors
- Pipe racks
- Utility pipelines
Assets and substrates
- Pipe exteriors
- Pipe racks
- Utility pipelines
- Substrate: Carbon steel
- Substrate: Old coating
Common failure risks
- Atmospheric corrosion
- Heat
- UV and weathering
Selection questions
- What asset is being protected, and is it new build, factory finish, or maintenance?
- Which exposure risks matter most: corrosion, UV, water, chemicals, abrasion, heat, fire, hygiene, VOC, or throughput?
- What result should be optimized: lowest initial cost, balanced protection, longer maintenance interval, production speed, lower VOC, appearance, or surface-tolerant maintenance?
- Which cooperation route fits the buyer: product supply, system package, OEM, distributor, project support, or local supply-chain collaboration?
Surface preparation
- Confirm substrate condition, oil, salts, dust, rust, laitance, old coating, and surface profile
- Match preparation grade to the selected system and expected durability
- Run adhesion or compatibility checks when old coating remains
Application conditions
- Confirm substrate temperature, ambient temperature, humidity, dew point margin, ventilation, and drying window
- Review film thickness, recoating interval, pot life, and handling time from current TDS
Available colors and packaging
- Standard colors and practical finish targets can be reviewed before quotation
- Special colors, gloss, texture, and private-label packaging need sample or batch confirmation
Documentation available
- Current TDS
- SDS request
- Packaging and shelf-life check
- Export document review
- Basic application notes
Product database links
Product pages to verify next
Epoxy Zinc-Rich Primer 80
Epoxy Anti-Corrosion
Epoxy Zinc-Rich Primer 70
Epoxy Anti-Corrosion
Epoxy Zinc-Rich Primer 1503
Epoxy Anti-Corrosion
Inorganic Zinc-Rich Primer
Specialty Coatings
Epoxy Primer 1000
Epoxy Anti-Corrosion
Epoxy MIO Intermediate Coat 1010E
Epoxy Anti-Corrosion
Epoxy MIO Intermediate High Build
Epoxy Anti-Corrosion
Epoxy Topcoat 1015
Epoxy Anti-Corrosion
Essential / Standard / Extended systems
Essential
Lowest practical initial cost where exposure and durability requirements are moderate.
- Confirm substrate and preparation level
- Use a simple primer and finish route suitable for the service class
Final product selection depends on current TDS and project constraints.
Standard
Balanced protection, application practicality, and document support for normal commercial procurement.
- Confirm primer and topcoat compatibility
- Use a system schedule matched to exposure and handling needs
Recommended as the default review route for most inquiries.
Extended Service
Longer maintenance interval, stronger weathering resistance, or more aggressive exposure.
- Increase barrier build where justified
- Use higher durability finish options when UV or color retention matters
Requires stronger review of surface preparation, inspection, and film build.
Maintenance / Surface-Tolerant
Maintenance work where full blasting is limited and old coating may remain.
- Identify old coating and remaining corrosion
- Use compatible maintenance primers only after review
Loose rust, oil, salts, powdery coating, and weak old film still need removal.
Supply and partnership routes
Route B: System Package Supply
Primer-intermediate-topcoat sets, floor systems, corrosion systems, quantity estimation, and system sequence requests.
System schedule · Product matching · Theoretical consumption · Application sequence · Basic quality-control checklist
Route A: Standard Product Supply
Known specifications, standard colors, standard packaging, distributor replenishment, and one-time purchase requests.
Product supply · Current TDS/SDS request support · Packaging and export document checks · Basic application notes
What Qilu can provide
- Supply confirmed Qilu product options after review
- Provide current TDS/SDS and export document support when available
- Prepare starter system schedules and theoretical consumption references
- Coordinate samples, color discussion, packaging checks, and quotation follow-up
What Qilu cannot provide
- Replace local engineering, applicator, or regulatory responsibility
- Guarantee performance without confirmed surface preparation, exposure, application, and inspection controls
- Confirm high-liability service without technical review and current documentation
Need a Customized Anti-Corrosion Solution?
Our technical team can design the optimal anti-corrosion coating system based on your specific environment and usage conditions.
Contact Technical Team